T35u Read Write SATA/IDE Bridge

t35u_rw

All Forensic Bridges can switch between a write-blocked or read/write device by adjusting the DIP switch settings located behind the break-away plastic on the device. However, once the break-away plastic is removed, that device needs to be validated before each use to ensure the proper configuration of the device was selected. At the request of forensic examiners, the yellow-cased bridges is created to dedicate to read/write operation as a way ensure read/write operation to help eliminate the potential for misuse during forensic investigations. 

Specifications

Product USB 3.0 Forensic Bridge
Model T35u / T35u-RW
Connectors: Host side (Rear)
USB One USB 3.0 Type B (9- pin, super/ high/full/low speed)
DC Input One 5-pin Mini-DIN connector for use with TP2 power supply, and one bayonet connector for use with future power supply options
Connectors: Device Side
SATA SATA Signal Connector
IDE IDE Signal Connector
DC Out 4-pin 3M drive power connector (power to SATA or IDE hard disk)
Switches
Power Toggles DC power for T35u and T35u-RW
DIP Switch 4-position DIP switch configures user-selectable options (DIP Switches can be accessed by removing a knock-out panel on the side of the T35u or T35u-RW case)
Other Features
Status LEDs 7 LEDs: DC IN good, Power ON, IDE drive detected, SATA drive detected, Host connected, Write-block enabled, Drive activity
Factory Configuration Black-case units are configured as read-only (model T35u)
Yellow-case units are configured as read-write (model T35u-RW)
Compatibility
SATA Devices SATA 1 or SATA 2 hard disk devices
IDE Devices Parallel ATA hard disk devices with LBA (Logical Block Addressing) support
Host Interface USB 3.0 (Backward compatible with USB high/full/low speed)
Host O/S Windows XP/2000/newer, Macintosh OS X, most Linux distributions (note: Linux distributions have varying levels and quality of support for USB 3.0)
Physical / Environmental
Power 5-6 watts typical operating (not including hard disk)
Supply voltage (DC IN) +5VDC @ 2A, +12VDC @ 2A (includes budget for hard disk)
Output voltage (DC OUT) +5VDC @ 1A, +12VDC @ 1A
Dimensions 5.625 in. (L) x 3.25 in. (W) x 1.125 in. (H)
Weight 5.9oz (168g)
Operating temperature range 0 to 55 degrees C (no airflow)
Storage temperature range -40 to 70 degrees C
Relative humidity Up to 90% (non-condensing)